Epomax Single component primer is specially designed for all types’ metal surfaces. Our single pack epoxy is two component in 1 pack. It has excellent adhesion power on substrate of all types of metal. Its unique properties like quick drying, excellent smooth finish will improve the total quality of painting works.
All types of roofing works, shutters ect.
Epomax is a two component primer in a single pack, hence it is very important to shake well and mix properly. Continue doing this in every half an hour duration, before you pour small quantity form a big can.
Before applying Epomax single pack epoxy primer ensure the surface free from dust, Oil, grease and other loose particle of old painted films. Well clean painting surface with appropriate emery paper and wipe down. If there is any gap in joints, fill with good quality metal paste and smoothen the surface with sand paper. No moisture should not be on the surface, it will cause poor adhesion and peel off the film.
| Physical Appearance | Viscous and free flowing material. |
| Applicator for painting | Spray gun, roller or brush. |
| Nature of thinner | Solvent Base thinner (Acrobex-AT-98) |
| Dilution of product | 10 to 15% (One litre paint with 100 to150 ml Thinner) |
| Finish | Smooth and Uniform finish. |
| Particle size | +7 on Hegman gauge. |
| Surface Dry | Within 10 minutes @30 degree temperature. |
| Hard dry | 6 to 8 hours. |
| Recoating time | After 10 hours from first coat. |
| Specific gravity | 1.2 to 1.3 gm. /cc. |
| Solid Content | 60% |
| Dry film thickness | 20 to 30 microns in single coat. |
| Covering Capacity | 80 to 90 sq:ft/Litre. |
| Colours availability | Grey |
| Shelf life | 18 months from the date of Mfg. |
| Availability of Packing | 20,10, 4, 1 Litre & 500 ml in metal container. |
