Seal Pro
Clear Wall Sealer Coat
Seal Pro from Maxel Paints is a specialized clear sealer coat formulated to protect your walls from dampness, water seepage, and smoke stains. Acting as a transparent shield, it strengthens the wall surface and ensures the beauty of your topcoat lasts longer. Whether used beneath interior or exterior finishes, Seal Pro forms a protective layer that enhances durability and resists moisture penetration.
Key Features / USP
Effective Dampness Barrier: Prevents water from penetrating the wall surface, keeping interiors dry and healthy.
Seals Porous Surfaces: Locks the wall pores and enhances adhesion for subsequent coats.
Smoke & Stain Protection: Prevents stains from kitchen smoke or moisture from spoiling the topcoat.
Clear Finish: Transparent film maintains the natural look of the surface while providing protection.
Direct-to-Cement Application: Can be applied directly over cement plaster for superior waterproofing performance.
Easy to Apply: Ready to use — no dilution required.
Applications
Interior and Exterior Walls
Kitchens and Utility Areas
Bathrooms and Damp-Prone Surfaces
Newly Plastered Walls (as a sealer before applying putty, primer, or paint)
Surface Preparation
Clean the surface thoroughly to remove dust, loose particles, grease, or old flaking paint.
For seepage-prone areas, apply directly on bare cement plaster.
Ensure the surface is completely dry before application.
Application Method
Tools: Brush or roller.
Coats: Apply two coats without dilution for best results.
Drying Time:
Touch Dry: 30 minutes
Recoat Time: 4–6 hours
Coverage
80–100 sq. ft. per litre for two coats, depending on surface porosity.
Available Pack Sizes
1L, 4L, 10L, and 20L.
Finish
Clear, semi-gloss transparent coating.
